P+F 接近开关 NBB15-U1-E2
P+F 接近开关 NBB15-U1-E2
产品价格:(人民币)
  • 规格: NBB15-U1-E2
  • 发货地:本地至全国
  • 品牌:
  • 最小起订量:1件
  • 免费会员
    会员级别:试用会员
    认证类型:企业认证
    企业证件:通过认证

    商铺名称:四川铭欣科技有限公司

    联系人:牛先生(先生)

    联系手机:

    固定电话:

    企业邮箱:1415011616@qq.com

    联系地址:四川省成都市

    邮编:

    联系我时,请说是在电子快手网上看到的,谢谢!

    商品详情

      参数表节选:的技术参数 NBB15-U1-E2

      General specifications
      Switching function Normally open (NO)
      Output type PNP
      Rated operating distance 15 mm
      Installation flush
      Output polarity DC
      Assured operating distance 0 ... 12.15 mm
      Actual operating distance 13.5 ... 16.5 mm typ. 15 mm
      Reduction factor rAl 0.33
      Reduction factor rCu 0.31
      Reduction factor r304 0.74
      Reduction factor rBrass 0.41
      Nominal ratings
      Operating voltage 10 ... 30 V
      Switching frequency 0 ... 560 Hz
      Hysteresis typ. 5 %
      Reverse polarity protection reverse polarity protected
      Short-circuit protection pulsing
      Voltage drop ≤ 2 V
      Operating current 0 ... 200 mA
      Off-state current 0 ... 0.5 mA typ. 0.01 mA
      No-load supply current ≤ 20 mA
      Operating voltage indicator LED, green
      Switching state indicator LED, yellow
      Functional safety related parameters
      MTTFd 1460 a
      Mission Time (TM) 20 a
      Diagnostic Coverage (DC) 0 %
      Approvals and certificates
      EAC conformity TR CU 020/2011
      UL approval cULus Listed, General Purpose
      CSA approval cCSAus Listed, General Purpose
      CCC approval CCC approval / marking not required for products rated ≤36 V
      Ambient conditions
      Ambient temperature -25 ... 85 °C (-13 ... 185 °F)
      Mechanical specifications
      Connection type screw terminals
      Information for connection A maximum of two conductors with the same core cross section may be mounted on one terminal connection! 
      tightening torque 1.2 Nm + 10 %
      Core cross-section up to 2.5 mm2
      Minimum core cross-section without wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm2
      Maximum core cross-section without wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm2
      Housing material PA/metal with epoxy powder coating
      Sensing face PA
      Degree of protection IP68 / IP69K
      Mass 225 g
      Note Tightening torque: 1.8 Nm (housing)
    0571-87774297