商铺名称：上海翰粤自动系统有限公司
联系人：瞿章文（先生）
联系手机：
固定电话：
企业邮箱：441405171@qq.com
联系地址：上海松江思贤路2399弄185号
邮编：1600
联系我时，请说是在电子快手网上看到的，谢谢！
- 扩展模块连接接口，最多可寻址 24 点数字量输入、16 点数字量输出、8 点模拟量输入和 2 点模拟量输出。
- 具有用于 LOGO! TD 文本显示屏的连接选件（可连接到所有 LOGO! 0BA6 基本型设备）
- 以太网接口，用于与 SIMATIC 控制器、SIMATIC 面板以及 PC 进行通讯
- 可组网多达 8 个 LOGO! 设备
- 使用标准 SD 卡或 SIMATIC 存储卡
- 继电器输出，最高输出电流 10A(不适于 LOGO!24).
- 集成了可参数设计背光的显示区(4x12字符)。
- 集成了操作员控制面板。
- 内置EEPROM存储器，用于控制程序和设定值
- 用于防复制和专有技术保护的可选程序模块。
- 可选电池模块和组合电池/程序模块，2 年后备集成实时时钟。
- 内置夏令时/冬令时自动调节的实时时钟。
- 8个数字量输入，4个数字量输出。
- 对于DC12/24V型号，4个输入作为模拟量输入(0-10V)；也可作为数字量输入。
- 4个输入可用来高速计数，最高5KHz(只针对于直流型)。
- 扩展模块连接接口，最多可编址 24 点数字量输入、16 点数字量输出、8 点模拟量输入和 2 点模拟量输出。
- 用于连接到 LOGO!TD 文字显示屏。
- 每个用户程序最多 200 个函数块
- 以太网接口（取代以前系列的串行编程接口）
- 继电器输出，输出电流最大为 10A
- 集成了可参数设计背光的显示区(4x12字符)。
- 集成了操作员控制面板。
- 内置EEPROM存储器，用于控制程序和设定值
- 标准 SD 卡或 SIMATIC 存储卡可选
- 内置夏令时/冬令时自动调节的实时时钟。
- 备份集成的实时时钟 20 天。
- 8个数字量输入，4个数字量输出。
- 对于DC12/24V型号，4个输入作为模拟量输入(0-10V)；也可作为数字量输入。
- 4个输入可用来高速计数，最高5KHz(只针对于直流型)。
- 扩展模块连接接口，最多可编址 24 点数字量输入、16 点数字量输出、8 点模拟量输入和 2 点模拟量输出。
- 用于连接到 LOGO!TD 文字显示屏。
- 以太网端口
- 继电器输出，输出电流最大为 10A
- 背光可参数化集成显示区（6 x 16 个字符，3 种背光颜色）。
- 集成了操作员控制面板。
- 内置EEPROM存储器，用于控制程序和设定值
- 可选的标准微型 CF 卡
- 内置夏令时/冬令时自动调节的实时时钟。
- 备份集成的实时时钟 20 天。
- 8个数字量输入，4个数字量输出。
- 对于DC12/24V型号，4个输入作为模拟量输入(0-10V)；也可作为数字量输入。
- 4个输入可用来高速计数，最高5KHz(只针对于直流型)。
- 扩展模块连接接口，最多可编址 24 点数字量输入、20 点数字量输出、8 点模拟量输入和 8 点模拟量输出。
- 连接 LOGO!TDE 通过以太网。
-
集成有基本和特殊功能：
-
基本逻辑功能：
与，或，非，与非，或非，异或，上升沿/下降沿触发。 -
特殊功能：
接通延时，锁存接通延时，断开延时，脉冲延时，锁定延时，计数器（加计数/减计数），时间开关，间隔延时继电器，运行小时数计数器，触发器，异步脉冲发生器，年时间开关，舒适照明开关功能，随机发生器，楼梯照明开关功能（符合 DIN 18015-2），边沿触发间隔延时继电器，组合接通/断开延时，模拟值比较器，模拟触发器，模拟值变化触发器，模拟看门狗，模拟放大器，文本和变量显示，移位寄存器，软键功能，PI 控制器，斜坡功能，模拟复用器，PWM 功能，模拟算术运算功能，模拟算术运算功能错误检测功能。
-
基本逻辑功能：
- 可链接 200/400 个函数块。
-
27/64 个位存储器
（包括重启位存储器，用于控制集成显示屏和 LOGO! 的背光显示位存储器TD，用于在消息文本中的 2 个可参数化字符之间切换的位存储器）。 - 内置保持。
- 口令保护。
- 作为选项可提供专有保护技术程序模块或 CF/微型 CF 卡。
- LOGO! 0BA6 集成实时时钟的后备， 可选用使用寿命 2 年的电池模块和组合电池/程序模块
- LOGO! 集成实时时钟的后备 0BA7 和 LOGO!8 个，20 天。
- 可选用的 LOGO!TD 文本显示屏与所有 ..0BA6 Pure 型的连接
- 数据记录至内部存储器或 CF 卡（最多 2000 个记录）
- 用于 LOGO! 的宏（用户自定义功能）Soft Comfort V7
- 可以连接 400 个功能块
- 16 个模拟位存储器
- 64 个接线端子
- 4 个 8 位移位寄存器
-
新增特殊功能：
天文时钟，模拟滤波器，平均值计算，最小/最大值，定时器 - 诊断功能
- 数据记录至内部存储器或微型 CF 卡（最多 20000 个记录）
- 用于 LOGO! 的宏（用户自定义功能）极为简单
- 可以连接 400 个功能块
- 64 个模拟位存储器
- 64 个接线端子
- 4 个 8 位移位寄存器
- 扩展诊断功能
-
● 12 V DC
-
● 24 V DC
-
● 115 V DC
-
● 230 V DC
-
● 24 V AC
-
● 115 V AC
-
● 230 V AC
-
● Number
-
● Power reserve
-
● for signal "1" permissible range for 0 to 55 °C, max.
-
— with inductive load, max.
-
— with resistive load, max.
-
● Limit class B, for use in residential areas
-
● IP20
-
● Marine approval
-
● min.
-
● max.
-
● relative to ambient temperature-atmospheric pressure-installation altitude
-
— With condensation, tested in accordance with IEC 60068-2-38, max.
-
— against biologically active substances / conformity with EN 60721-3-3
-
— against chemically active substances / conformity with EN 60721-3-3
-
— against mechanically active substances / conformity with EN 60721-3-3
-
● 12 V DC
-
● 24 V DC
-
● 115 V DC
-
● 230 V DC
-
● 115 V AC
-
● 230 V AC
-
● Number
-
● Power reserve
-
— with inductive load, max.
-
— with resistive load, max.
-
● Limit class B, for use in residential areas
-
● IP20
-
● Marine approval
-
● min.
-
● max.
-
● relative to ambient temperature-atmospheric pressure-installation altitude
-
— With condensation, tested in accordance with IEC 60068-2-38, max.
-
— against biologically active substances / conformity with EN 60721-3-3
-
— against chemically active substances / conformity with EN 60721-3-3
-
— against mechanically active substances / conformity with EN 60721-3-3
LOGO! 0BA7 型号中的新功能：
注：
SIPLUS extreme 产品基于 SIMATIC 标准产品。此处的内容摘自相关的标准产品。增加了与 SIPLUS extreme 相关的信息
Design
LOGO! 0BA6:
LOGO!0BA7:
LOGO!8:
Functions
作为选项可提供的功能
用于 LOGO! 的其它功能0BA7
用于 LOGO! 的其它功能8
Technical Specifications
|
Order number |
6AG1052-1CC01-2BA6 |
6AG1052-1MD00-2BA6 |
6AG1052-1HB00-2BA6 |
6AG1052-1FB00-2BA6 |
|
|---|---|---|---|---|---|
|
SIPLUS LOGO! 24C |
SIPLUS LOGO! 12/24RC |
SIPLUS LOGO! 24RC |
SIPLUS LOGO! 230RC |
||
|
Display |
|
|
|
|
|
|
with display |
Yes; The display is bright at temperatures below 0 °C and dark at temperatures over +55 °C. This procedure is self-reversing on returning to the standard temperature range (0 °C to +55 °C). |
Yes; The display is bright at temperatures below 0 °C and dark at temperatures over +55 °C. This procedure is self-reversing on returning to the standard temperature range (0 °C to +55 °C). |
Yes; The display is bright at temperatures below 0 °C and dark at temperatures over +55 °C. This procedure is self-reversing on returning to the standard temperature range (0 °C to +55 °C). |
Yes; The display is bright at temperatures below 0 °C and dark at temperatures over +55 °C. This procedure is self-reversing on returning to the standard temperature range (0 °C to +55 °C). |
|
|
Installation type/mounting |
|
|
|
|
|
|
Mounting |
on 35 mm DIN rail, 4 spacing units wide |
on 35 mm DIN rail, 4 spacing units wide |
on 35 mm DIN rail, 4 spacing units wide |
on 35 mm DIN rail, 4 spacing units wide |
|
|
Supply voltage |
|
|
|
|
|
|
Rated value (DC) |
|||||
|
|
Yes |
||||
|
|
Yes |
Yes |
Yes |
||
|
|
Yes |
||||
|
|
Yes |
||||
|
permissible range, lower limit (DC) |
20.4 V; 22 V @ >55 °C |
10.8 V; 11 V @ >55 °C |
20.4 V; 22 V @ >55 °C |
100 V |
|
|
permissible range, upper limit (DC) |
28.8 V; 27.5 V @ >55 °C |
28.8 V; 27.5 V @ >55 °C |
28.8 V; 27.5 V @ >55 °C |
253 V |
|
|
Rated value (AC) |
|||||
|
|
Yes |
||||
|
|
Yes |
||||
|
|
Yes |
||||
|
Time of day |
|
|
|
|
|
|
Time switching clocks |
|
|
|
|
|
|
|
190 |
8 |
|||
|
|
80 h |
80 h |
80 h |
80 h |
|
|
Digital inputs |
|
|
|
|
|
|
Number of digital inputs |
8; Of which 4 can be used in analog mode (0 to 10 V) |
8; Of which 4 can be used in analog mode (0 to 10 V) |
8 |
8 |
|
|
Digital outputs |
|
|
|
|
|
|
Number of digital outputs |
4; Transistor |
4; Relays |
4; Relays |
4; Relays |
|
|
Short-circuit protection |
Yes; electrical (1 A) |
No; external fusing necessary |
No; external fusing necessary |
No; external fusing necessary |
|
|
Output current |
|
|
|
|
|
|
|
0.3 A; 0.2 A @ > 55 °C; 0.3 A @ > 55 °C & < 15 s |
||||
|
Relay outputs |
|
|
|
|
|
|
Switching capacity of contacts |
|
|
|
|
|
|
|
3 A; 1 A per relay @ > 55 °C; 3 A per relay @ > 55 °C & < 15 s |
3 A; 1 A per relay @ > 55 °C; 3 A per relay @ > 55 °C & < 15 s |
3 A; 1 A per relay @ > 55 °C; 3 A per relay @ > 55 °C & < 15 s |
||
|
|
10 A; 3 A per relay @ > 55 °C; 10 A per relay @ > 55 °C & < 15 s |
10 A; 3 A per relay @ > 55 °C; 10 A per relay @ > 55 °C & < 15 s |
10 A; 3 A per relay @ > 55 °C; 10 A per relay @ > 55 °C & < 15 s |
||
|
EMC |
|
|
|
|
|
|
Emission of radio interference acc. to EN 55 011 |
|
|
|
|
|
|
|
Yes; Radio interference suppression according to EN55011, Limit Value Class B |
Yes |
Yes |
Yes |
|
|
Degree and class of protection |
|
|
|
|
|
|
Degree of protection acc. to EN 60529 |
|||||
|
|
Yes |
Yes |
Yes |
Yes |
|
|
Standards, approvals, certificates |
|
|
|
|
|
|
CSA approval |
No |
No |
No |
No |
|
|
UL approval |
Yes; File: E120869 // Tmax = 55 °C |
Yes; File: E120869 // Tmax = 55 °C |
Yes; File: E120869 // Tmax = 55 °C |
Yes; File: E120869 // Tmax = 55 °C |
|
|
FM approval |
No |
No |
No |
No |
|
|
developed in accordance with IEC 61131 |
Yes |
Yes |
Yes |
Yes |
|
|
according to VDE 0631 |
Yes |
Yes |
Yes |
Yes |
|
|
Marine approval |
|
|
|
|
|
|
|
No |
No |
No |
No |
|
|
Ambient conditions |
|
|
|
|
|
|
Ambient temperature during operation |
|
|
|
|
|
|
|
-25 °C; = Tmin |
-25 °C; = Tmin |
-25 °C; = Tmin |
-25 °C; = Tmin |
|
|
|
70 °C; = Tmax; 55 °C @ UL/cUL use |
70 °C; = Tmax; 55 °C @ UL/cUL use |
70 °C; = Tmax; 55 °C @ UL/cUL use |
70 °C; = Tmax; 55 °C @ UL/cUL use |
|
|
Extended ambient conditions |
|
|
|
|
|
|
|
Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m) |
Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m) |
Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m) |
Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) |
|
|
Relative humidity |
|
|
|
|
|
|
|
100 %; Relative humidity, incl. condensation / frost permitted (no commissioning under condensation conditions) |
100 %; Relative humidity, incl. condensation / frost permitted (no commissioning under condensation conditions) |
100 %; Relative humidity, incl. condensation / frost permitted (no commissioning under condensation conditions) |
100 %; Relative humidity, incl. condensation / frost permitted (no commissioning under condensation conditions) |
|
|
Resistance |
|
|
|
|
|
|
|
Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation! |
Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation! |
Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation! |
Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation! |
|
|
|
Yes; Class 3C4 incl. salt spray. The supplied connector covers must remain on the unused interfaces during operation! |
Yes; Class 3C4 incl. salt spray. The supplied connector covers must remain on the unused interfaces during operation! |
Yes; Class 3C4 incl. salt spray. The supplied connector covers must remain on the unused interfaces during operation! |
Yes; Class 3C4 incl. salt spray. The supplied connector covers must remain on the unused interfaces during operation! |
|
|
|
Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation! |
Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation! |
Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation! |
Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation! |
|
|
Dimensions |
|
|
|
|
|
|
Width |
72 mm |
72 mm |
72 mm |
72 mm |
|
|
Height |
90 mm |
90 mm |
90 mm |
90 mm |
|
|
Depth |
55 mm |
55 mm |
55 mm |
55 mm |
|
|
Order number |
6AG1052-1MD00-2BA7 |
6AG1052-1FB00-2BA7 |
|
|---|---|---|---|
|
SIPLUS LOGO!12/24RCE |
SIPLUS LOGO! 230RCE |
||
|
Display |
|
|
|
|
with display |
Yes |
Yes |
|
|
Installation type/mounting |
|
|
|
|
Mounting |
on 35mm DIN rail, 6 spacing units wide |
on 35mm DIN rail, 6 spacing units wide |
|
|
Supply voltage |
|
|
|
|
Rated value (DC) |
|||
|
|
Yes |
||
|
|
Yes |
||
|
|
Yes |
||
|
|
Yes |
||
|
permissible range, lower limit (DC) |
10.8 V |
100 V |
|
|
permissible range, upper limit (DC) |
28.8 V |
253 V |
|
|
Rated value (AC) |
|||
|
|
Yes |
||
|
|
Yes |
||
|
Time of day |
|
|
|
|
Time switching clocks |
|
|
|
|
|
333 |
333 |
|
|
|
480 h |
480 h |
|
|
Digital inputs |
|
|
|
|
Number of digital inputs |
8; of which 4 can be used in analog mode (0 to 10 V); max. load 9 A per relay @ all DI @ +55 °C to +60 °C; max. load 1 A per relay @ all DI @ > +60 °C; max. load 3 A per relay @ half the number of DI @ > +60 °C |
8; half the number of DI @ max. load 1A per relay @ > +60 °C |
|
|
Digital outputs |
|
|
|
|
Number of digital outputs |
4; Relays |
4; Relays |
|
|
Short-circuit protection |
No; external fusing necessary |
No; external fusing necessary |
|
|
Relay outputs |
|
|
|
|
Switching capacity of contacts |
|
|
|
|
|
3 A |
3 A |
|
|
|
10 A; max. last 9 A per relay @ all DI @ +55 °C to +60 °C; max. load 1 A per relay @ all DI @ > +60 °C; max. load 3 A per relay @ half the number of DI @ > +60 °C |
10 A; max. load 1A per relay @ half the number of DI @ > +60 °C |
|
|
EMC |
|
|
|
|
Emission of radio interference acc. to EN 55 011 |
|
|
|
|
|
Yes; Radio interference suppression according to EN55011, Limit Value Class B |
Yes; Radio interference suppression according to EN55011, Limit Value Class B |
|
|
Degree and class of protection |
|
|
|
|
Degree of protection acc. to EN 60529 |
|||
|
|
Yes |
Yes |
|
|
Standards, approvals, certificates |
|
|
|
|
CSA approval |
Yes |
||
|
UL approval |
Yes |
Yes |
|
|
FM approval |
Yes |
||
|
developed in accordance with IEC 61131 |
Yes |
Yes |
|
|
according to VDE 0631 |
Yes |
Yes |
|
|
Marine approval |
|
|
|
|
|
Yes |
||
|
Ambient conditions |
|
|
|
|
Ambient temperature during operation |
|
|
|
|
|
-25 °C; = Tmin |
-25 °C; = Tmin |
|
|
|
70 °C; = Tmax |
70 °C; = Tmax |
|
|
Extended ambient conditions |
|
|
|
|
|
Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m) |
Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) |
|
|
Relative humidity |
|
|
|
|
|
100 %; Relative humidity, incl. condensation / frost permitted (no commissioning under condensation conditions) |
100 %; Relative humidity, incl. condensation / frost permitted (no commissioning under condensation conditions) |
|
|
Resistance |
|
|
|
|
|
Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation! |
Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation! |
|
|
|
Yes; Class 3C4 incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation! |
Yes; Class 3C4 incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation! |
|
|
|
Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation! |
Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation! |
|
|
Dimensions |
|
|
|
|
Width |
107 mm |
107 mm |
|
|
Height |
90 mm |
90 mm |
|
|
Depth |
55 mm |
55 mm |
|
